A comparison of Zayandehrood River water values for agriculture and the environment

River water management is challenging not only since they are open systems with changing physical structures, but also because the water values are mostly unknown over varied sectors. If policymakers grasp water values, water management will be more efficient. This research intends to examine the values of water in agriculture, which receives the most substantial portion of water resources, with the values of water in the environment in Isfahan located in the Zayandehrood River basin of Iran. The consequences of contingent valuation and production function methods revealed that per cubic metre value of water is 13 times higher in the environment than agriculture. The government should reconsider the higher value of the environment despite it is a non‐market value. The contingent valuation model additionally proved that women exhibited 21% more willingness to pay than men in order to protect the environment; however, they are paid less by 36%.     

基于Copula-POME的负荷与气象因素相关性度量研究

负荷与气象因素的关系是非线性且模糊的，针对传统的线性相关系数不能准确刻画负荷与其气象成因的相依结构。在分析负荷对气象因素响应的基础上，提出了结合Copula函数与最大熵原理（POME）的负荷与气象因素相关性度量方法，该方法基于POME建立了负荷与气象因素的边缘分布，利用Copula函数拟合了负荷与气象多变量系统中的非线性相依结构，并推导了度量相关性的Kendall秩相关系数、Spearman秩相关系数和Copula熵。在实际的负荷和气象系统中的应用表明，Copula-POME方法在分析负荷与其气象成因关系时无先验分布假定，具有灵活的函数形式，能准确表达多变量系统的相依结构；秩相关系数和Copula熵弥补了线性相关系数在度量尾部相关中的不足，能准确度量负荷与气象因素的相关性。     

Numerical research of double‐diffusive natural convection in elliptical cylinders: Effect of thermal Rayleigh number

This paper is the first part of a two‐part study, and it presented numerical research of double‐diffusive natural convection within an annulus area, situated in two horizontal confocal elliptic solids charged by a Newtonian fluid. The elliptical coordinates were used to transform the physical domain into a rectangular one. To resolve the governing equations and the boundary layer conditions, a calculator code based on the finite volume approach was developed. The details of the influences of thermal Rayleigh number on heat and mass transfer were investigated. Results obtained were compared with those existing in other reasearch works.     

基于深度学习的番茄叶部病害识别模型

番茄叶病种类多、成因复杂,其预防和识别难度较大。传统基于机器学习的方法多靠人工识别,需要一定的专家经验,且具有主观性强、识别准确率不高等缺点。为实现番茄叶病特征的自动提取,并提高识别准确率,提出一种基于深度学习的番茄叶病识别模型。该模型基于卷积神经网络对番茄叶部病害特征进行自动提取,获得高维特征后,采用PCA降维算法去除冗余特征;从增大类间距离并减小类内距离的角度改进了softmax分类器,提高了识别准确率。将该模型在CrowdAI提供的数据集上进行了仿真验证,结果表明,该模型能够对番茄叶部常见10种病害进行自动提取特征和识别,综合识别准确率达到95%以上。     

Prediction and sensitivity analysis of CNTs-modified asphalt’s adhesion force using a radial basis neural network model

Abstract

The expected longer service life of modified asphalt can be jeopardized by different environmental factors, such as moisture, oxidation, etc. which affect the desired properties by altering the adhesive property. An insight into knowledge of the adhesive property of the asphalt can help in providing more durable asphalt pavement. The study attempted to develop different models of adhesive properties of polymers and carbon nanotubes (CNTs) modified asphalt binders. The polymer-CNT modified asphalt is processed to prepare different types of samples, by simulating the damage due to moisture and oxidization, following the corresponding standard method. An Atomic Force Microscopy (AFM) was employed to assess the nanoscale adhesion force of the tested samples following the existing functional group in asphalt. Finally, the study has developed Radial Basis Function Neural Network (RBFNN) as a function of different parameters including; asphalt chemistry (i.e. AFM tip type and constant), type and percentages of polymers and CNTs and different environmental exposures (oxidation, moisture, etc.) to predict the nano adhesion force of asphalt. It is observed that the adhesive property of the Styrene–Butadiene modified asphalt is more consistent compared to the Styrene–Butadiene–Styrene modified asphalt, while the presence of Single-Wall Nanotubes (SWNT) is observed to affect the adhesive properties of asphalt significantly as compared to Multi-Wall Nanotubes (MWNT). The higher accuracy level of RBFNN model also indicates that the functional group (tip-type) adding with the percentages and types of polymers and CNTs significantly affect the adhesive properties of asphalt.     

A Student's t-based density peaks clustering with superpixel segmentation (tDPCSS) method for image color clustering

Image color clustering is a basic technique in image processing and computer vision, which is often applied in image segmentation, color transfer, contrast enhancement, object detection, skin color capture, and so forth. Various clustering algorithms have been employed for image color clustering in recent years. However, most of the algorithms require a large amount of memory or a predetermined number of clusters. In addition, some of the existing algorithms are sensitive to the parameter configurations. In order to tackle the above problems, we propose an image color clustering method named Student's t-based density peaks clustering with superpixel segmentation (tDPCSS), which can automatically obtain clustering results, without requiring a large amount of memory, and is not dependent on the parameters of the algorithm or the number of clusters. In tDPCSS, superpixels are obtained based on automatic and constrained simple non-iterative clustering, to automatically decrease the image data volume. A Student's t kernel function and a cluster center selection method are adopted to eliminate the dependence of the density peak clustering on parameters and the number of clusters, respectively. The experiments undertaken in this study confirmed that the proposed approach outperforms k-means, fuzzy c-means, mean-shift clustering, and density peak clustering with superpixel segmentation in the accuracy of the cluster centers and the validity of the clustering results.     

基于改进GSO的裂解炉原料切换策略研究(英文)

The scheduling process of cracking furnace feedstock is important in an ethylene plant. In this paper it is described as a constraint optimization problem. The constraints consist of the cycle of operation, maximum tube metal temperature, process time of each feedstock, and flow rate. A modified group search optimizer is pro-posed to deal with the optimization problem. Double fitness values are defined for every group. First, the factor of penalty function should be changed adaptively by the ratio of feasible and general solutions. Second, the“excel-lent”infeasible solution should be retained to guide the search. Some benchmark functions are used to evaluate the new algorithm. Final y, the proposed algorithm is used to optimize the scheduling process of cracking furnace feedstock. And the optimizing result is obtained.     

胸腺五肽辅助治疗肺癌对免疫功能影响及其疗效的系统评价

为了系统地评价胸腺五肽作为辅助药物治疗各种肺癌的疗效及其对机体免疫功能的影响，利用电子检索收集有关胸腺五肽联合放疗或化疗方案治疗肺癌的临床随机对照试验文献，对符合纳入标准的文献，采用RevMan5.3 软件进行系统评价。最终共纳入文献 9 篇，总样本量 784 例。Meta 分析结果表明，胸腺五肽作为辅助药物治疗各种肺癌提高总有效率的差异无统计学意义[OR ＝ 1.44, 95%CI(0.99, 2.10), P ＝0.06 ＞ 0.05]。在对免疫功能的影响方面，胸腺五肽的使用显著增高外周血中的 CD3+ 细胞水平[OR ＝ 5.88, 95% CI(2.34, 9.42), P ＝0.001]，CD4+ 细胞水平也显著上升[OR ＝8.32, 95%CI(5.22, 11.42), P ＜ 0.00001] , CD4＋ /CD8＋比值也有明显的提高[OR ＝ 0.38, 95% CI(0.18, 0.59), P＝0.0002]，但 CD8+ 细胞水平的差异无统计学意义[OR ＝－3.12, 95% CI ( －9.02, 2.79), P ＞0.05]。总的来说，本研究在一定程度上反映了在辅助治疗肺癌方面，胸腺五肽能显著提高外周血中的 CD3+ 细胞水平、CD4+ 细胞水平、CD4+/CD8+ 比值。而对于治疗的有效率、CD8+ 细胞水平，差异无统计学意义。     

A new metaheuristic for optimization: Optics inspired optimization (OIO)

Due to the law of reflection, a concave reflecting surface/mirror causes the incident light rays to converge and a convex surface/mirror causes the light rays to reflect away so that they all appear to be diverging. These converging and diverging behaviors cause that the curved mirrors show different image types depending on the distance between the object and the mirror. We model such optical phenomena metaphorically into the searching process of numerical optimization by a new algorithm called optics inspired optimization (OIO). OIO treats the surface of the numerical function to be optimized as a reflecting surface in which each peak is assumed to reflect as a convex mirror and each valley to reflect as a concave one. Each individual is assumed to be an artificial object (or light point) that its artificially glittered ray is reflected back by the function surface, given that the surface is convex or concave, and the artificial image is formed (a candidate solution is generated within the search domain) based on the mirror equations adopted from physics of optics. Besides OIO, we introduce different variants of it, called ROIO (Rotation based OIO), and COIO (Convex combination based OIO) algorithms and conduct an extensive computational effort to find out the merit of the new algorithms. Our comparisons on benchmark test functions and a real world engineering design application (i.e., optimization of a centrifuge pump) demonstrate that the new algorithms are efficient and compete better than or similar to most of state of the art optimization algorithms with the advantage of accepting few input parameters.     

Simultaneous enhancement of the efficiency and stability of organic solar cells using PEDOT:PSS grafted with a PEGME buffer layer

We report a simple processing method to simultaneously improve the efficiency and stability of organic solar cells (OSCs). Poly(4-styrene sulfonate)-doped poly(3,4-ethylenedioxy-thiophene (PEDOT:PSS), widely used as hole transport layer (HTL) in OSCs, tends to accelerate the degradation of devices because of its hygroscopic and acidic properties. In this regard, we have modified PEDOT:PSS to reduce its hygroscopic and acidic properties through a condensation reaction between PEDOT:PSS and poly(ethylene glycol) methyl ether (PEGME) in order to improve the efficiency and stability of OSCs. As a result, the power conversion efficiency (PCE) increased by 21%, from 2.57% up to 3.11%. A better energy level alignment by the reduced work function of the modified PEDOT:PSS with a highest occupied molecular orbital (HOMO) level of poly(3-hexylthiophene-2,5-diyl) (P3HT) is considered the origin of the improved the efficiency. The half-life of OSCs with PEDOT:PSS modified with PEGME buffer layer also increased up to 3.5 times compared to that of devices with pristine PEDOT:PSS buffer layer.